5.3.4. Power consumption settings¶

In the Application Settings Device configuration -> Power Management

Power consumption settings window

Current reduction enabled - activates the reduced energy consumption mode.

• Current in hold mode - it determines the current in the hold mode in % of the nominal value. Value range: 0 .. 100%.

• Current reduction delay - parameter determines the delay between switching to the STOP mode and power reduction activation. It is measured in milliseconds. Value range: 0 .. 65535 ms.

• Power off when stop - it activates the function that deenergized the motor windings after switching to the STOP state.

• Power off delay - parameter determines the delay in seconds between switching to the STOP mode and motor power-off. Value range: 0 .. 65535.

• Jerk free - activates the current smoothing function to eliminate the motor vibration.

• Current set time - parameter determines the time for jerk free current setting in milliseconds. Value range: 0 .. 65535 ms.

Detailed description of these parameters see in the Power control section.